Description
More performance and sensitivity for your fork by reducing seal friction with RacingBros wipers. You will feel the difference immediately.
How to choose the right seals for your fork:
1. Measure your fork's stanchion's diameter. RacingBros are offered for 30, 32, 34, 35, 36, 38 or 40 mm stanchions.
2. Measure the seal bed diameter of your fork (the diameter of the place in the fork's lowers where the seal is pressed on). Compatible options are 39, 40, 41, 42, 44, 45, 46, 48 and 50 mm seal beds.
3. Check what type will fit better on your fork: NON FLANGE or standard, with flange (see the comparison photo). Just look which type are currently installed on your fork.
For example if you select RacingBros 34 mm No Flange (34×44) this means: seals for forks with 34 mm stanchions, for fork lowers with 44mm seas's bedl and these seals have no flange.
These seals are suitable for the following fork models:
30mm – Rock Shox; Manitou and other forks with 30mm stanchions and 39 (39.5mm) seal beds.
32x41mm – DT Swiss; Rock Shox Bluto, SID 2018+, Reba 2018+, Suntour and other forks with 32mm stanchions and 41 mm seal beds.
32mm – Rock Shox; Fox; Manitou; X-Fusion; Magura and other forks with 32mm stanchions and 42mm seal beds.
34mm – Ohlins; Fox; Manitou; X-Fusion; BOS and other forks with 34mm stanchions and 44mm seal beds.
35mm -Rock Shox, Cane Creek, DNM, RST and other forks with 35mm stanchions and 45mm seal beds.
36mm – Ohlins; Fox; Manitou; X-Fusion; BOS and other forks with 36mm stanchions and 46mm seal beds.
38mm – Ohlins; Fox; Rock Shox and other forks with 38mm stanchions and 48mm seal beds.
40mm – Fox and other forks with 40mm stanchions and 50mm seal beds.
Hybrid mixture: The peculiarity of this scraper is on the addition of MoS2, graphite and PTFE in the Lycran material. This enables a very low breakaway torque is achieved, which improves the response of the fork.
One-piece construction: The one-piece wiper performance modes of Racingbros unite dust seal and oil seal in one component. This they hold, as compared to conventional two-piece seals where a higher system pressure of up to 20 kg / cm. The oil inside the fork is held reliably be kept away from the inside of the fork in the system while dirt, mud or sand.
Long shelf life: both in long-term test of 20,000 suspensions under spraying mud, sand, water and ice as well as Numerous test pilots during the development phase, the high quality has shown:
completely waterproof and UV-resistant
Working Temperature of -25 ° -80 ° Celsius